Molecular tagging of seed size using MITE markers in an induced large seed mutant with higher cotyledon cell size in groundnut.

A large seed mutant, TG 89 having a 76.7% increment in hundred kernel weight in comparison to its parent TG 26, was isolated from an electron beam-induced mutagenized population. Studies based on environmental scanning electron microscopy of both parent and mutant revealed that the mutant seed cotyledon had significantly bigger cell size than parent. A mapping population with 122 F2 plants derived from the mutant and a distant normal seed genotype (ICGV 15007) was utilized to map the QTL associated with higher HKW. Bulk segregant analysis revealed putative association of three markers with this mutant large seed trait. Further, genotyping of F2 individuals with polymorphic markers detected 14 linkage groups with a map distance of 1053 cM. QTL analysis revealed a significant additive major QTL for the mutant large seed trait on linkage group A05 explaining 12.7% phenotypic variation for the seed size. This QTL was located between flanking markers AhTE333 and AhTE810 having a map interval of 4.7 cM which corresponds to 90.65 to 107.24 Mbp in A05 chromosome, respectively. Within this genomic fragment, an ortholog of the BIG SEEDS 1 gene was found at 102,476,137 bp. Real-time PCR revealed down-regulation of this BIG SEEDS 1 gene in the mutant indicating a loss of function mutation giving rise to a large seed phenotype. This QTL was validated in 11 advanced breeding lines having large seed size from this mutant but with varied genetic backgrounds. This validation showcased a highly promising selection accuracy of 90.9% for the marker-assisted selection. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03909-0.

Advancement in the Breeding, Biotechnological and Genomic Tools towards Development of Durable Genetic Resistance against the Rice Blast Disease.

Rice production needs to be sustained in the coming decades, as the changeable climatic conditions are becoming more conducive to disease outbreaks. The majority of rice diseases cause enormous economic damage and yield instability. Among them, rice blast caused by Magnaportheoryzae is a serious fungal disease and is considered one of the major threats to world rice production. This pathogen can infect the above-ground tissues of rice plants at any growth stage and causes complete crop failure under favorable conditions. Therefore, management of blast disease is essentially required to sustain global food production. When looking at the drawback of chemical management strategy, the development of durable, resistant varieties is one of the most sustainable, economic, and environment-friendly approaches to counter the outbreaks of rice blasts. Interestingly, several blast-resistant rice cultivars have been developed with the help of breeding and biotechnological methods. In addition, 146 R genes have been identified, and 37 among them have been molecularly characterized to date. Further, more than 500 loci have been identified for blast resistance which enhances the resources for developing blast resistance through marker-assisted selection (MAS), marker-assisted backcross breeding (MABB), and genome editing tools. Apart from these, a better understanding of rice blast pathogens, the infection process of the pathogen, and the genetics of the immune response of the host plant are very important for the effective management of the blast disease. Further, high throughput phenotyping and disease screening protocols have played significant roles in easy comprehension of the mechanism of disease spread. The present review critically emphasizes the pathogenesis, pathogenomics, screening techniques, traditional and molecular breeding approaches, and transgenic and genome editing tools to develop a broad spectrum and durable resistance against blast disease in rice. The updated and comprehensive information presented in this review would be definitely helpful for the researchers, breeders, and students in the planning and execution of a resistance breeding program in rice against this pathogen.

Development of candidate gene-based markers and map-based cloning of a dominant rust resistance gene in cultivated groundnut (Arachis hypogaea L.).

A dominant rust resistance gene, VG 9514-Rgene was isolated through map-based cloning. Sequence analysis revealed non-synonymous mutations in the TIR, NBS and LRR region of the R-protein. Candidate gene-based markers from these SNPs revealed complete co-segregation of the isolated VG 9514-Rgene with rust resistance in a RIL population and confirmed their map position in between FRS 72 and SSR_GO340445 markers in arahy03 chromosome. Blastp search of VG 9514-Rprotein detected Arahy.T6DCA5 with >80.0% identity that localized at 142,544,745.0.142,549,184 in arahy03 chromosome. Ka/Ks calculation revealed that VG 9514-Rgene had undergone positive selection compared to four homologous genes in the groundnut genome. Homology based structure modelling of this R-protein revealed a typical consensus three-dimensional folding of TIR-NBS-LRR protein. Non-synonymous mutations in susceptible version of R-protein were mapped and found E268Q mutation in hhGRExE motif, Y309F in RNBS-A motif and I579T in MHD motif of NB-ARC domain are probable candidates for loss of function.

Conventional and new-breeding technologies for improving disease resistance in lentil (Lens culinaris Medik).

Lentil, an important cool season food legume, is a rich source of easily digestible protein, folic acid, bio-available iron, and zinc nutrients. Lentil grows mainly as a sole crop in the winter after harvesting rice in South Asia. However, the annual productivity is low due to its slow growth during the early phase, competitive weed infestation, and disease outbreaks during the crop growth period. Disease resistance breeding has been practiced for a long time to enhance resistance to various diseases. Often the sources of resistance are available in wild crop relatives. Thus, wide hybridization and the ovule rescue technique have helped to introgress the resistance trait into cultivated lentils. Besides hybridization, induced mutagenesis contributed immensely in creating variability for disease tolerance, and several disease-resistant mutant lines have been developed. However, to overcome the limitations of traditional breeding approaches, advancement in molecular marker technologies, and genomics has helped to develop disease-resistant and climate-resilient lentil varieties with more precision and efficiency. This review describes types of diseases, disease screening methods, the role of conventional and new breeding technologies in alleviating disease-incurred damage and progress toward making lentil varieties more resilient to disease outbreaks under the shadow of climate change.

Characterization of an Isostructural MOF Series of Imidazolate Frameworks Potsdam by Means of Sorption Experiments with Water Vapor.

Sorption measurements of water vapor on an isoreticular series of Imidazolate Frameworks Potsdam (IFP), based on penta-coordinated metal centers with secondary building units (SBUs) connected by multidentate amido-imidate-imidazolate linkers, have been carried out at 303.15 K. The isotherm shapes were analyzed in order to gain insight into material properties and compared to sorption experiments with nitrogen at 77.4 K and carbon dioxide at 273.15 K. Results show that water vapor sorption measurements are strongly influenced by the pore size distribution while having a distinct hysteresis loop between the adsorption and desorption branch in common. Thus, IFP-4 and -8, which solely contain micropores, exhibit H4 (type I) isotherm shapes, while those of IFP-1, -2 and -5, which also contain mesopores, are of H3 (type IV) shape with three inflection points. The choice of the used linker substituents and transition metals employed in the framework has a tremendous effect on the material properties and functionality. The water uptake capacities of the examined IFPs are ranging 0.48 mmol g-1 (IFP-4) to 6.99 mmol g-1 (IFP-5) and comparable to those documented for ZIFs. The water vapor stability of IFPs is high, with the exception of IFP-8.

Rpivnt1 provides resistance through the mediation of a light responsive guardee in potato.

The disease triangle describes the interrelationship among pathogen, host, and environment towards disease prevalence in the field. The mechanistic role of environment on NLR-mediated resistance was not known until now. Recently, a comprehensive work revealed that light controls late blight disease reaction in potato caused by the Irish famine pathogen. A specific R gene Rpivnt1 in potato showed dichotomous behavior in disease reaction due to the light-responsive alternate promoter selection of another host gene glycerate 3 kinase (GLYK) during its transcription. The full-length GLYK protein traps the pathogen effector AVRvnt1 into a recognition event which is later sensed by Rpivnt1 in the presence of light. In dark, the truncated GLYK protein devoid of its chloroplastic transit peptide could not able to recognize AVRvnt1 and thus resistance get compromised. A possible model for this event is proposed here for ease in understanding.

Next Generation Sequencing Based Forward Genetic Approaches for Identification and Mapping of Causal Mutations in Crop Plants: A Comprehensive Review.

The recent advancements in forward genetics have expanded the applications of mutation techniques in advanced genetics and genomics, ahead of direct use in breeding programs. The advent of next-generation sequencing (NGS) has enabled easy identification and mapping of causal mutations within a short period and at relatively low cost. Identifying the genetic mutations and genes that underlie phenotypic changes is essential for understanding a wide variety of biological functions. To accelerate the mutation mapping for crop improvement, several high-throughput and novel NGS based forward genetic approaches have been developed and applied in various crops. These techniques are highly efficient in crop plants, as it is relatively easy to grow and screen thousands of individuals. These approaches have improved the resolution in quantitative trait loci (QTL) position/point mutations and assisted in determining the functional causative variations in genes. To be successful in the interpretation of NGS data, bioinformatics computational methods are critical elements in delivering accurate assembly, alignment, and variant detection. Numerous bioinformatics tools/pipelines have been developed for such analysis. This article intends to review the recent advances in NGS based forward genetic approaches to identify and map the causal mutations in the crop genomes. The article also highlights the available bioinformatics tools/pipelines for reducing the complexity of NGS data and delivering the concluding outcomes.

Genome-wide association mapping revealed numerous novel genomic loci for grain nutritional and yield-related traits in rice (Oryza sativa L.) landraces.

A core set of 190 rice landraces were used to decipher the genetic structure and to discover the chromosomal regions containing QTLs, affecting the grain micro-nutrients, fatty acids, and yield-related traits by using 148 molecular markers in this study. Landraces were categorized into three sub-groups based on population stratification study and followed by neighbor-joining tree and principal component analysis. Analysis of variance revealed abundant variations among the landraces for studied traits with less influence of environmental factors. Genome Wide Association Studies (GWAS) revealed 22 significant and consistent QTLs through marker trait association (MTAs) for 12 traits based on 2 years and pooled analysis. Out of 22 QTLs, three have been reported earlier while 19 QTLs are novel. Interestingly, 13 QTLs out of 22 were explained more than 10% phenotypic variance. Association of RM1148 and RM205 with Days to 50% flowering was comparable with flowering control genes Ghd8/qDTH8 and qDTH9, respectively. Similarly, Zn content was associated with RM44, which is situated within the QTL qZn8-1. Moreover, significant association of RM25 with oleic acid content was closely positioned with QTL qOle8. Association of RM7434 with grain yield/plant; RM184 with spikelet fertility %; R3M10, R9M42 with hundred seed weight; RM536, RM17467, RM484, RM26063 with Fe content; RM44, RM6839 with Zn content are the major outcomes of this study. In addition, association of R11M23 with days to 50% flowering, panicle length and total spikelets per panicle are explained the possible occurrence of pleiotropism among these traits. Prominent rice landraces viz., Anjani (early maturity); Sihar (extra dwarf); Gangabaru (highest grain yield/plant); Karhani (highest iron content); Byalo-2 (highest zinc content) and Kadamphool (highest oleic acid) were identified through this study. The present study will open many avenues towards utilization of these QTLs and superior landraces in rice breeding for developing nutrition-rich high yielding varieties.

Crystal-to-Crystal Synthesis of Photocatalytic Metal-Organic Frameworks for Visible-Light Reductive Coupling and Mechanistic Investigations.

Postmodification of reticular materials with well-defined catalysts is an appealing approach to produce new catalytic functional materials with improved stability and recyclability, but also to study catalysis in confined spaces. A promising strategy to this end is the postfunctionalization of crystalline and robust metal-organic frameworks (MOFs) to exploit the potential of crystal-to-crystal transformations for further characterization of the catalysts. In this regard, two new photocatalytic materials, MOF-520-PC1 and MOF-520-PC2, are straightforwardly obtained by the postfunctionalization of MOF-520 with perylene-3-carboxylic acid (PC1) and perylene-3-butyric acid (PC2). The single crystal-to-crystal transformation yielded the X-ray diffraction structure of catalytic MOF-520-PC2. The well-defined disposition of the perylenes inside the MOF served as suitable model systems to gain insights into the photophysical properties and mechanism by combining steady-state, time-resolved, and transient absorption spectroscopy. The resulting materials are active organophotoredox catalysts in the reductive dimerization of aromatic aldehydes, benzophenones, and imines under mild reaction conditions. Moreover, MOF-520-PC2 can be applied for synthesizing gram-scale quantities of products in continuous-flow conditions under steady-state light irradiation. This work provides an alternative approach for the construction of well-defined, metal-free, MOF-based catalysts.

Functional properties and the oligomeric state of alkyl hydroperoxide reductase subunit F (AhpF) in Pseudomonas aeruginosa.

Alkyl hydroperoxide reductase subunit F (AhpF) is a well-known flavoprotein that transfers electrons from pyridine nucleotides to the peroxidase protein AhpC via redox-active disulfide centers to detoxify hydrogen peroxide. However, study of AhpF has historically been limited to particular eubacteria, and the connection between the functional and structural properties of AhpF remains unknown. The present study demonstrates the dual function of Pseudomonas aeruginosa AhpF (PaAhpF) as a reductase and a molecular chaperone. It was observed that the functions of PaAhpF are closely linked with its structural status. The reductase and foldase chaperone function of PaAhpF predominated for its low-molecular-weight (LMW) form, whereas the holdase chaperone function of PaAhpF was found associated with its high-molecular-weight (HMW) complex. Further, the present study also demonstrates the multiple function of PaAhpF in controlling oxidative and heat stresses in P. aeruginosa resistance to oxidative and heat stress.

Identification of major consensus QTLs for seed size and minor QTLs for pod traits in cultivated groundnut (Arachis hypogaea L.).

Hundred kernel weight is an important indicator for large-seeded genotype selection. A recombinant inbred line population was used to decipher the genetic architecture of seed size and three pod traits in cultivated groundnut based on the phenotypic data from six and three environments, respectively. The study revealed a consensus major QTL for HKW in B07 group that explained 10.5-23.9% phenotypic variation due to seed size. Further, two other minor QTLs were identified in B03 and B08 group for the seed size. Two minor QTLs for pod beak were positioned in B03 and A08. A minor QTL for pod reticulation was also mapped in the same map interval with the pod beak QTL in A08. Another minor QTL for pod constriction was co-mapped with the minor QTL for HKW in B08. The other minor QTL for pod constriction was placed in the neighboring map interval with the consensus QTL for seed size in B07 that suggests linkage of pod constriction with large seed trait. Analysis of the flanking markers profile in 71 cultivated groundnut genotypes revealed a strong association of pPGPseq_2E06 marker with large seed trait.

Systematic Experimental Study on Quantum Sieving of Hydrogen Isotopes in Metal-Amide-Imidazolate Frameworks with narrow 1-D Channels.

Quantum sieving of hydrogen isotopes is experimentally studied in isostructural hexagonal metal-organic frameworks having 1-D channels, named IFP-1, -3, -4 and -7. Inside the channels, different molecules or atoms restrict the channel diameter periodically with apertures larger (4.2 Šfor IFP-1, 3.1 Šfor IFP-3) and smaller (2.1 Šfor IFP-7, 1.7 Šfor IFP-4) than the kinetic diameter of hydrogen isotopes. From a geometrical point of view, no gas should penetrate into IFP-7 and IFP-4, but due to the thermally induced flexibility, so-called gate-opening effect of the apertures, penetration becomes possible with increasing temperature. Thermal desorption spectroscopy (TDS) measurements with pure H2 or D2 have been applied to study isotope adsorption. Further TDS experiments after exposure to an equimolar H2 /D2 mixture allow to determine directly the selectivity of isotope separation by quantum sieving. IFP-7 shows a very low selectivity not higher than S=2. The selectivity of the materials with the smallest pore aperture IFP-4 has a constant value of S≈2 for different exposure times and pressures, which can be explained by the 1-D channel structure. Due to the relatively small cavities between the apertures of IFP-4 and IFP-7, molecules in the channels cannot pass each other, which leads to a single-file filling. Therefore, no time dependence is observed, since the quantum sieving effect occurs only at the outermost pore aperture, resulting in a low separation selectivity.

Cobalt Amide Imidate Imidazolate Frameworks as Highly Active Oxygen Evolution Model Materials.

Two imidazolate-based Co-MOFs, IFP-5 and IFP-8 (imidazolate framework Potsdam), with a different peripheral group -R (-Me and -OMe, respectively) have been synthesized by a solvothermal method and tested toward the oxygen evolution reaction (OER). Remarkably, IFP-8 presents much lower overpotentials (319 mV at 10 mA/cm2 and 490 mV at 500 mA/cm2) than IFP-5 toward OER, as confirmed by online gas chromatography measurements (Faradaic yield of O2 > 99%). Moreover, the system is extraordinarily stable during 120 h, even when used as a catalyst toward the overall water splitting reaction without any sign of fatigue. An integrated ex situ spectroscopic study, based on powder X-ray diffraction, extended X-ray absorption fine structure, and attenuated total reflection, allows the identification of the active species and the factors that determine the catalytic activity. Indeed, it was found that the performances are highly affected by the nature of the -R group, because this small change strongly influences the conversion of the initial metal organic framework to the active species. As a consequence, the remarkable activity of IFP-8 can be ascribed to the formation of Co(O)OH phase with a particle size of a few nanometers (3-10 nm) during the electrocatalytic oxygen evolution.

Mapping of a dominant rust resistance gene revealed two R genes around the major Rust_QTL in cultivated peanut (Arachis hypogaea L.).

KEY MESSAGE: A consensus rust QTL was identified within a 1.25 cM map interval of A03 chromosome in cultivated peanut. This map interval contains a TIR-NB-LRR R gene and four pathogenesis-related genes. Disease resistance in plants is manifested due to the specific interaction between the R gene product and its cognate avirulence gene product (AVR) in the pathogen. Puccinia arachidis Speg. causes rust disease and inflicts economic damages to peanut. Till now, no experimental evidence is known for the action of R gene in peanut for rust resistance. A fine mapping approach towards the development of closely linked markers for rust resistance gene was undertaken in this study. Phenotyping of an RIL population at five environments for field rust score and subsequent QTL analysis has identified a 1.25 cM map interval that harbored a consensus major Rust_QTL in A03 chromosome. This Rust_QTL is flanked by two SSR markers: FRS72 and SSR_GO340445. Both the markers clearly identified strong association of the mapped region with rust reaction in both resistant and susceptible genotypes from a collection of 95 cultivated peanut germplasm. This 1.25 cM map interval contained 331.7 kb in the physical map of A. duranensis and had a TIR-NB-LRR category R gene (Aradu.Z87JB) and four glucan endo-1,3 ß glucosidase genes (Aradu.RKA6 M, Aradu.T44NR, Aradu.IWV86 and Aradu.VG51Q). Another resistance gene analog was also found in the vicinity of mapped Rust_QTL. The sequence between SSR markers, FRS72 and FRS49, contains an LRR-PK (Aradu.JG217) which is equivalent to RHG4 in soybean. Probably, the protein kinase domain in AhRHG4 acts as an integrated decoy for the cognate AVR from Puccinia arachidis and helps the TIR-NB-LRR R-protein to initiate a controlled program cell death in resistant peanut plants.

Transgenic approaches for genetic improvement in groundnut (Arachis hypogaea L.) against major biotic and abiotic stress factors.

Cultivated groundnut (Arachis hypogaea L.) is considered as one of the primary oilseed crops and a major fodder for cattle industry in most of the developing countries, owing to its rich source of protein. It is due to its geocarpic nature of growth that the overall yield performance of groundnut is hindered by several biotic and abiotic stress factors. Multidimensional attempts were undertaken to combat these factors by developing superior groundnut varieties, modified with integral mechanism of tolerance/resistance; however this approach proved to be futile, owing to inferior pod and kernel quality. As a superior alternative, biotechnological intervention like transformation of foreign genes, either directly (biolistic) or via Agrobacterium, significantly aided in the development of advanced groundnut genotypes equipped with integral resistance against stresses and enhanced yield attributing traits. Several genes triggered by biotic and abiotic stresses, were detected and some of them were cloned and transformed as major parts of transgenic programmes. Application of modern molecular biological techniques, in designing biotic and abiotic stress tolerant/resistant groundnut varieties that exhibited mechanisms of resistance, relied on the expression of specific genes associated to particular stress. The genetically transformed stress tolerant groundnut varieties possess the potential to be employed as donor parents in traditional breeding programmes for developing varieties that are resilient to fungal, bacterial, and viral diseases, as well as to draught and salinity. The present review emphasizes on the retrospect and prospect of genetic transformation tools, implemented for the enhancement of groundnut varieties against key biotic and abiotic stress factors.

InDel marker based genetic differentiation and genetic diversity in traditional rice (Oryza sativa L.) landraces of Chhattisgarh, India.

Rice has been cultivating and utilizing by humans for thousands of years under diverse environmental conditions. Therefore, tremendous genetic differentiation and diversity has occurred at various agro-ecosystems. The significant indica-japonica differentiation in rice provides great opportunities for its genetic improvement. In the present investigation, a total of 42 polymorphic InDel markers were used for differentiating 188 rice landraces and two local varieties of Chhattisgarh, India into indica and japonica related genotypes based on 'InDel molecular index'. Frequency of japonica alleles varied from 0.11 to 0.89 among landraces. Results revealed that 104 rice landraces have indica type genetic architecture along with three tested indica cultivars Swarna, Mahamaya and Rajeshwari. Another 60 landraces were placed under 'close to indica' type. It was found that three rice landraces i.e. Kalajeera, Kapri, Tulsimala were 'close to japonica' type and 21 landraces were 'intermediate' type. The result from the calculation of 'InDel molecular index' was further verified with STRUCTURE, AMOVA, PCA and cluster analysis. Population structure analysis revealed two genetically distinct populations within the 190 rice landraces/genotypes. Based on AMOVA, 'intermediate' type, 'close to japonica' type and Dongjinbyeo (a japonica cultivar from Republic of Korea) displayed significant genetic differentiation (ɸPT = 0.642, P = 0.000) from 'indica' and 'close to indica' groups. The PCA scatter plot and dendrogram demonstrated a clear pattern of two major group differentiations. 'Close to japonica' type and 'intermediate' type landraces/genotypes were grouped with Dongjinbyeo and formed a separate cluster at 30% Jaccard's similarity level from rest of the landraces/genotypes which were 'close to indica' or 'indica' type. Such a significant genetic differentiation among the locally adapted landraces could be exploited for the development of rice varieties introgressing higher yield potential and better plant types of japonica type as per the need of consumers and rice traders.

Experimental and Theoretical Analysis of the Influence of Different Linker Molecules in Imidazolate Frameworks Potsdam (IFP-n) on the Separation of Olefin-Paraffin Mixtures.

Four metal-organic frameworks with similar topology but different chemical environment inside the pore structure, namely, IFP-1, IFP-3, IFP-5, and IFP-7, have been investigated with respect to the separation potential for olefin-paraffin mixtures as well as the influence of the different linkers on adsorption properties using experiments and Monte Carlo simulations. All IFP structures show a higher adsorption of ethane compared to ethene with the exception of IFP-7 which shows no selectivity in breakthrough experiments. For propane/propane separation, all adsorbents show a higher adsorption for the olefin. The experimental results agree quite well with the simulated values except for the IFP-7, which is presumably due to the flexibility of the structure. Moreover, the experimental and simulated isotherms were confirmed with breakthrough experiments that render IFP-1, IFP-3, and IFP-5 as suitable for the purification of ethene from ethane.

Insights into the pores of microwave-assisted metal-imidazolate frameworks showing enhanced gas sorption.

Microwave heating (MW)-assisted synthesis has been widely applied as an alternative method for the chemical synthesis of organic and inorganic materials. In this work, we report MW-assisted synthesis of three isostructural 3D frameworks with a flexible linker arm of the chelating linker 2-substituted imidazolate-4-amide-5-imidate, named IFP-7-MW (M = Zn, R = OMe), IFP-8-MW (M = Co; R = OMe) and IFP-10-MW (M = Co; R = OEt) (IFP = Imidazolate Framework Potsdam). These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under MW- and also conventional electrical heating (CE)-assisted conditions in DMF. The structure of these materials was determined by IR spectroscopy and powder X-ray diffraction (PXRD) and the identity of the materials synthesized under CE-conditions was established. Materials obtained from MW-heating show many fold enhancement of CO2 and H2 uptake capacities, compared to the analogous CE-heating method based materials. To understand the inner pore-sizes of IFP structures and variations of gas sorptions, we performed positron annihilation lifetime spectroscopy (PALS), which shows that MW-assisted materials have smaller pore sizes than materials synthesized under CE-conditions. The "kinetically controlled" MW-synthesized material has an inherent ability to trap extra linkers, thereby reducing the pore sizes of CE-materials to ultra/micropores. These ultramicropores are responsible for high gas sorption.

Electron beam irradiation revealed genetic differences in radio-sensitivity and generated mutants in groundnut (Arachis hypogaea L.).

Electron beam accelerators are being used for many industrial applications including food and agriculture. A 10MeV linear accelerator facility was standardized for low dose application 0.1-1 kGy) in pulse mode using unscanned scattered beam for irradiation of groundnut seeds for mutation breeding. Using this facility, 50% growth reduction (GR50) dose was standardized in five groundnut genotypes. There were significant differences for radio-sensitivity among these genotypes. Seed mutagenesis of two groundnut genotypes, TG 26 and TG 68 with electron beam has generated one large seeded and four high yielding mutants in preliminary field trials.